Some would say that at this stage I was almost there with the soil sensor project. All there was left to do was get the thing into the ground. Being that I am a flawed perfectionist, I had some other ideas . I was not going to simply chuck it in the ground without some…
A very brief part three of the, somewhat delayed, soil temperature monitoring project. This project has been left a little on the side gathering dust whilst I spent some time concentrating on the cloud detection project, but I am now determined to get this system up and running and its sensors in the ground before…
I have been running a little while now and am always in the habit of taking my phone with me to get some monitoring in on my progress with the aid of GPS and so on. I have been using a really nice app called mapmyrun. It has given me months of good service and…
This is a brief memory aid for me with some small, and perhaps useful, tips when writing articles using reStructuredText[^1]. I am aiming to keep on top of this document and maintain it as a living thing; when I find something new and useful, it will be appended.
This brief article focuses on only one part of using Pelican as a static site generation tool - the day to day usage once the set up is established. There are loads of really good articles on how to get started with Pelican and I am not about to add to that growing pile; there…
This post follows on quite quickly (for me at least!) from my last one regarding my latest tests and reflections on environmental issues with some thoughts about how to measure ground temperatures in a reliable way. I am also going to take a look at the difficulties I might face in trying to automatically interpret…
As a rather inexperienced writer, it is the little things I struggle with, as well as the big things you might add. I find that one of the most annoying is getting title case correct. There are a lot of style guides about which may or may not help; I find some of them cryptic…
Since the last part in this series I have continued to conduct experiments comparing and contrasting the two variants of MLX90614, the wide field of view BAA and the considerably more focused BCF. Whilst undertaking these ‘in the field’ tests I have also come up against a few, what you might call, environmental problems which…
I finally have some energy back and am getting on with some projects again. It is about time really. I have spent most of the summer evenings not doing a great deal; just feeling like I needed the time to recover from the rigours of a very busy working day. I am normally one of these people who is not comfortable with just sitting down and meditating on things. I think on the whole it has probably been a positive step to sit back and de-stress in front of a book or two.
Nearly all articles you might look for regarding trying out an MLX90614 with an Arduino contain examples of using one sensor at a time. This makes sense as probably 99% of people are going to prototype a system with only one sensor in it. Quite a few articles make the incorrect assumption that having more…
I’ve been making a slow but steady stream of improvements to the blog this year which began with a migration from an ancient installation of Wordpress to the static Pelican HTML site generator. Many other blogs explain how this is achieved so I won’t bore you with it here.
A little bit of work stemming from from the soil temperature monitoring project; this is an aside on DS18B20 temperature sensing device address discovery with the Arduino. Being that I am going to have a handful of sensors in the ground and therefore not easily accessible for identification I need to find a way of easily finding out all the device addresses in one fell swoop.
Part two on the soil temperature monitoring project. Detailing some thoughts on how to get the sensors in to the ground in a way that will keep them protected from the underground environment. Following that, some subequent details on the construction of the sensor housings.
This project has its roots in a chance sighting of some, what I thought were, interesting looking API parameters on the Met Office weather data submission service. I’ve been running a small weather station for about a year with its data output being harvested by a RaspberryPi and packed off to the Met Office observation…
This is the next installment on the cloud detection project. This time I am starting to test out hooking up an MLX90614 or two to an Arduino and try out pointing it to the sky in the aim of get some interesting results.
This project has its roots in a discussion I had a while back with a friend who is a keen amateur astronomer. He had been complaining to me about how he thought that there was a distinct lack of cloud free nights in our corner of Northern Lincolnshire. In fact, he suggested, the weather was…
So, you want to be able to get QFTest to talk to your MySQL database server during test execution; just a small matter of getting the Jython client to play ball - easy when you know how.